Desktop automatic lock screw machine is used to replace the traditional hand-tightening screws machine. Hand tightening the screws and including hand-tightening and electric screwdrivers or pneumatic screwdriver to tighten the two, the latter through the electric or pneumatic way to produce rotating power to replace the frequent manual tightening action.

Desktop automatic lock screw machine Features:

  1, for most of the screws, especially stainless steel screws, versatility, the length of the screw ratio is not required;

  2, can replace the artificial screw lock to do the job, to achieve automatic lock screw, reduce the labor intensity, improve production efficiency;

  3, do not need to work with an external computer can be stand-alone operation, easy installation, easy operation, staff quickly grasp the operation and debugging, high-speed positioning accuracy, a worker can manage several machines at the same time,

  4, specializing in the production of automated iron head, style diversification, can quickly solve the difficult;

 5, the product can quickly remove the screw failure, when the exclusion, can be directly in the original error point to continue action;

  6, screw supply machine track can be adjusted to solve the multi-screw multi-specification (appropriate

Inch: M1.5 ~ M5.0)

Desktop automatic lock screw machine use steps

1, turn on the power, access to air, adjust the torque.

2, the screws into the screw silo, the amount of screws to not exceed the height of the rail conveyor is appropriate

3, the first lock before the screws, need to check whether there is a screwdriver screw nose to be locked.

4, if there is no screw in the electric screwdriver on the mouth to be locked, need to press the manual to send the screw button, so that the machine movement twice, to ensure that the screwdriver nose with a screw on the screwdriver nose waiting for the lock screw.

5, to ensure that the batch adjustment button in the lock screw position, a hand-held electric screwdriver, one hand to help lock the screw workpiece, align the screw hole under the locking screw.

6, to be approved by the power of the preset torque automatically stopped after the electric screwdriver, the second lock screw.

7, so repeat it.